Pentair
Keypad/Display Failure
Pump display is blank or unreadable, but motor still runs when controlled by automation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LCD or LED display, Loose keypad ribbon cable, Water intrusion into keypad, UV damage to display
How to Fix / Troubleshooting
Safety first: Turn off power before removing the keypad or drive cover.
- Step 1 – Reseat keypad cable: Remove the keypad/display module and reseat its connector to the drive board.
- Step 2 – Inspect for moisture: Check for condensation or water behind the display. If present, dry the area and correct any gasket issues.
- Step 3 – Test automation control: If automation still controls the pump correctly, the issue is isolated to the keypad/display.
- Step 4 – Replace keypad/display: Order and install the correct Pentair keypad/display module for your pump model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
IntelliFlo Keypad/Display Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements