Speck Pumpen Misalignment or Incorrect Reassembly

Pump is unusually loud and vibrates after being reassembled following seal or bearing replacement.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Seal plate not seated correctly on Speck housing, Impeller rubbing on diffuser, Missing or mispositioned spacers, Housing bolts unevenly tightened

Safety first: Turn off and lock out power before re-opening the pump.

Reassembly check:

Disassemble the pump and verify that the seal plate, diffuser, and impeller are correctly oriented and fully seated.
Ensure any spacers or washers on the shaft are in their original positions.
Tighten housing bolts evenly in a crisscross pattern to avoid distortion.

Rotate the shaft by hand before restarting to confirm there is no rubbing.

Medium 3/5

Speck seal plate and diffuser assembly

Check Price on Amazon

We may earn a commission from links on this page.