Summer Waves Display / User Interface Failure

Pump display is blank or very dim, but the motor still runs when plugged in.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LED/LCD display, Loose display ribbon cable, Partial control PCB failure, Moisture damage

Safety First: Unplug the pump before inspecting the control area.

Check for moisture: Look for condensation or water behind the display window. Allow the unit to dry thoroughly.
Power reset: After drying, plug the pump back in and see if the display returns.
Operation without display: If the pump runs but you cannot see settings, operate it via manual plug/unplug cycles as a temporary workaround.
Permanent fix: Replace the control head or entire pump if the display remains nonfunctional.

Medium 3/5

Control Panel Display Module

Check Price on Amazon

We may earn a commission from links on this page.