U.S. Motors pool pump runs but has very low flow; pressure at the filter gauge is lower than normal.

Safety first: Turn off power and close valves before opening the pump.

• Clean baskets: Remove and clean the skimmer basket(s) and the U.S. Motors pump strainer basket.
• Check suction valves: Ensure all necessary suction valves are fully open.
• Inspect impeller: If flow is still low, remove the pump housing and inspect the impeller eye for leaves, hair, or debris. Clear any blockage.
• Check suction line: For above-ground pools, inspect flexible suction hoses for kinks or collapse under suction. Replace if deformed.
• Reassemble and test: Reassemble the pump, prime, and verify restored flow and normal filter pressure.