Amana Open Radiant Surface Element

Electric radiant cooktop element will not heat, indicator light may still come on.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Burned-out radiant element, Failed infinite switch or control, Loose or burned wire at element, Faulty cooktop power board (on electronic models)

Safety first: Disconnect power at the breaker. Glass cooktops are fragile; handle carefully.

Access element: Remove mounting screws and lift the glass top (support it safely). Locate the non-heating element.
Inspect and test:
- Check for visible breaks or burn marks on the element coil.
- Disconnect wires and measure resistance; if open, replace the element.
Check switch or control: If the element is good, test the infinite switch (manual knob models) or the cooktop power board output (electronic models) and replace the faulty component.

Hard 4/5

Radiant Surface Element

Check Price on Amazon

We may earn a commission from links on this page.