Display shows F5E2, oven door lock position does not match command.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty lock position switch, Misadjusted latch, Wiring issue, Control board lock circuit fault

Safety first: Disconnect power.

Check latch alignment: Ensure the door latch engages and disengages fully.
Test lock switches: With a multimeter, verify that lock switches change state when latch moves.
Replace lock assembly: If switches are faulty or linkage is worn, replace the door lock assembly.

Hard 4/5

Oven Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.