F9E0
Amana
Miswired or Incorrect Line Voltage
Display shows F9E0, oven will not start, sometimes after a power outage or wiring change.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incorrect L1/L2/N wiring at terminal block, Loose power cord connections, Open neutral or missing leg of power, House wiring issue at breaker panel
How to Fix / Troubleshooting
Safety first: This involves live 240V circuits. If you are not experienced with electrical work, contact a licensed electrician or appliance technician.
- Verify power at outlet: Using a multimeter, check that the range receptacle has correct voltage (typically 240V across L1–L2 and 120V from each leg to neutral).
- Inspect terminal block:
- Turn off the breaker.
- Remove the rear cover to access the terminal block where the power cord connects.
- Confirm that L1, L2, and Neutral are connected according to the wiring diagram on the range.
- Tighten any loose screws and look for burned or melted terminals.
- Check cord type: Ensure the correct 3-wire or 4-wire cord is installed as specified for your installation and local code.
- Reset control: After correcting wiring, restore power and see if the code clears. If F9E0 persists with correct wiring and voltage, the control board may be damaged and require replacement.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Power Cord and Terminal Block
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements