F9E3
Amana
Oven Cooling Fan Speed or Feedback Error
Display shows F9E3, oven may not heat or may shut down during use.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed oven cooling fan motor, Blocked cooling air vents, Faulty fan speed sensor or tachometer, Wiring issue between fan and control board
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing internal components. Fan blades can be sharp.
- Check for airflow: During operation, you should feel warm air exiting the vent above the door or behind the control panel. If not, the cooling fan may not be running.
- Inspect vents: Ensure vents are not blocked by foil, pans, or grease buildup.
- Access cooling fan:
- Remove the rear panel to locate the oven cooling fan assembly.
- Inspect for obstructions, seized bearings, or burnt wiring.
- Test fan motor:
- With a multimeter, check continuity of the fan motor windings.
- If open or very high resistance, replace the fan motor.
- Wiring and control: Verify wiring from fan to control board is intact. If fan and wiring are good, the control board may not be driving the fan correctly and may need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements