Display shows F9E5, oven may not start or may shut down unexpectedly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty fan speed sensor, Incorrect fan motor installed, Control board fan feedback circuit failure, Wiring harness issue

Safety first: Disconnect power before accessing the fan and control board.

Verify correct parts: Confirm that the installed cooling fan motor is the correct Amana part number for your model.
Inspect wiring: Check the harness between the fan and control board for damage, loose connectors, or corrosion.
Replace suspect components: If wiring is good and the fan runs but the code persists, the control board's fan feedback circuit may be faulty and the electronic control should be replaced.

Hard 4/5

Electronic Oven Control Board

Check Price on Amazon

We may earn a commission from links on this page.