Display shows F9E7, oven may not start or may shut off when hot.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Stuck closed fan relay on control board, Shorted wiring causing constant power to fan, Incorrect wiring at fan or control, Control board failure

Safety first: Disconnect power before inspecting wiring or control board.

Observe fan behavior: If the cooling fan runs constantly whenever power is applied, suspect a stuck relay or wiring short.
Inspect wiring: Check the fan wiring harness for signs of melting, pinched insulation, or miswiring.
Control board replacement: If wiring is correct and the fan still runs continuously, the fan relay on the electronic control is likely welded closed. Replace the control board.

Hard 4/5

Electronic Oven Control Board

Check Price on Amazon

We may earn a commission from links on this page.