F10
Asko
Oven Temperature Sensor (RTD) Fault
Asko range oven display shows F10 and beeps; oven shuts off.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open or shorted oven temperature sensor, Damaged sensor wiring, Faulty electronic oven control (EOC) sensor circuit
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker and allow the oven to cool completely.
- Locate sensor: Inside the oven cavity, find the temperature sensor probe (usually on the back wall). Remove the mounting screws and gently pull the sensor forward to access the connector.
- Check connection: Ensure the sensor plug is firmly connected. If accessible from the rear, also check the connection at the control board.
- Inspect wiring: Look for frayed or burned insulation along the sensor leads. Replace the sensor if any damage is present.
- Replace sensor: If F10 persists, replace the oven temperature sensor with an Asko-compatible RTD. If the error remains after sensor replacement, the EOC may be defective and require replacement.
Do not operate the oven with a known sensor fault; temperature control will be unreliable.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Temperature Sensor (RTD Probe)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements