Avanti Control Power Loss or Failed Display Board

Clock and display are blank on Avanti range, but surface elements may still work (on some models)

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown internal fuse on control board, Loose wiring to EOC, Failed display/control board, Open neutral connection

Safety first: Disconnect power before accessing the control panel or internal wiring.

Check breaker: Ensure the range breaker is fully on and not partially tripped.
Inspect wiring: Remove the back panel behind the control and check for loose or burnt wires to the EOC.
Internal fuse: Some Avanti controls have a small fuse on the board. If blown, determine cause (shorted wiring, surge) and replace with identical rating.
Replace control: If wiring and fuse are good but the display remains dead, replace the electronic oven control board.

Hard 4/5

Electronic Oven Control Board (EOC)

Check Price on Amazon

We may earn a commission from links on this page.