F30
Bauknecht
Door Switch / Door Status Error
Display shows F30, oven interior light and fan may work but no heat
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty oven door switch, Misaligned door latch, Broken switch actuator, Wiring fault between switch and control
How to Fix / Troubleshooting
Safety first: Disconnect power before working around the door area.
- Check door closure: Ensure the door closes fully and evenly. Look for bent hinges or obstructions.
- Test door switch: Locate the door switch (usually behind the front frame). Manually press it and listen for a click. Use a multimeter to test continuity when pressed and released. Replace if defective.
- Inspect latch and actuator: Make sure the door latch properly engages the switch actuator. Adjust or replace bent parts.
- Check wiring: Inspect the harness from the switch to the control board for damage.
Warning: A faulty door switch can disable heating or cause unsafe operation during self-clean.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements