Belling
Door Glass Retainer or Bracket Failure
Oven door glass loose, rattling, or inner glass fallen out
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken glass clips, missing retaining screws, degraded adhesive pads, impact damage to door
How to Fix / Troubleshooting
Safety: Wear gloves and eye protection when handling glass. Ensure the oven is cool.
- Remove door: Open the door fully and release the hinge locks (if fitted). Lift the door off the hinges.
- Disassemble door: Lay the door on a soft surface and remove screws holding the inner and outer panels together. Carefully separate the panels.
- Inspect clips and brackets: Replace any broken glass retainers or brackets with genuine Belling parts. Clean old adhesive and fit new pads if required.
- Reassemble: Refit the glass panels in the correct order and orientation. Tighten all screws and refit the door to the cooker.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Glass Retainer Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements