Bertazzoni
Oven Door Glass Seal Failure / Condensation
Oven door glass is fogged or moisture appears between glass panes
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed inner door glass seal, Loose door screws, High humidity and frequent high-temperature use, Cracked glass
How to Fix / Troubleshooting
Safety first: Allow the oven and door to cool completely before disassembly.
- Check for cracks: Inspect inner and outer glass for cracks or chips. Replace any damaged glass immediately.
- Tighten door screws: Remove the door and tighten the screws around the door frame to improve sealing.
- Door disassembly: Carefully disassemble the door according to the service manual, separating the glass panes. Clean all glass surfaces and remove moisture.
- Replace seals: Install new door glass seals or gaskets if available for your model, then reassemble the door.
Warning: Handle glass with care and wear cut-resistant gloves.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Glass Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements