F6 error appears and oven display may be blank or flickering.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose ribbon cable between display and main board, Faulty power supply on control board, Damaged display module

Safety first: Unplug the range or switch off the breaker before removing the control panel.

Remove control panel: Access the back of the display by removing screws securing the front control panel.
Check ribbon cables: Reseat the flat ribbon cable(s) between the display and the main control board.
Inspect for damage: Look for burnt components or bulging capacitors on the control board.
Power reset: Reassemble, restore power, and test. If F6 persists, replace the electronic oven control or display module as a set.

Hard 4/5

Electronic Oven Control Board

Check Price on Amazon

We may earn a commission from links on this page.