F41
Fisher & Paykel
Heating Element Relay Fault
F41 displayed, oven may partially heat or one function (bake or broil) is inoperative
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck or open bake/broil relay, Burnt relay contacts, Damaged PCB tracks to relay, Control board failure
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before removing the control panel.
- Identify which function fails: Test Bake, Fan Bake, and Broil. Note which element does not heat.
- Check element and wiring: Inspect the non-heating element for visible damage and test for continuity. Check wiring from element to control board.
- Control board inspection: Look for discoloration or burning around the corresponding relay on the control board.
- Replace control board: If the element and wiring are good, the relay on the board is likely faulty. Replace the control board with the correct Fisher & Paykel part.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements