F71
Fisher & Paykel
Display Module Fault
F71 displayed, oven display may be blank or show garbled characters
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed display PCB, Loose display connector, Low-voltage power supply fault on control, Moisture ingress into display
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before accessing the control panel.
- Check for condensation: If the error appears after heavy cooking or cleaning, allow the panel to dry with power off for several hours.
- Inspect connectors: Remove the control panel and reseat the display module connector(s) on both the display and control board.
- Visual inspection: Look for burnt components or corrosion on the display PCB.
- Replace display module: If connections are sound but the display remains faulty or F71 persists, replace the display module with the correct Fisher & Paykel part.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements