Frigidaire Professional Door Switch / Light Circuit Fault

Oven light will not turn off even when door is closed

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Stuck or broken oven door switch, Shorted light relay on control board, Misaligned door not depressing switch

How to Fix / Troubleshooting

Safety first: Turn off power before accessing the switch or control.

  • Check door switch:
    • Locate the door switch (usually in the front frame).
    • Press it by hand; it should click.
    • Test for continuity; it should change state when pressed.
    • Replace the oven door switch if it is stuck or does not change state.
  • Inspect door alignment:
    • Ensure the door fully depresses the switch when closed; adjust hinges if needed.
  • Control board:
    • If the switch is good but the light stays on, the light relay on the EOC may be stuck; replace the electronic oven control board.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Switch
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements