Frigidaire Professional
No Heat – Power / Control Failure
Oven light works but oven will not heat in any mode
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped house breaker on one leg of 240V, Burned terminal block, Failed electronic oven control, Open thermal fuse or high-limit thermostat
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before inspecting wiring.
- Check breakers:
- Verify both poles of the double-pole breaker are on and not tripped.
- Inspect terminal block:
- Remove rear cover at power cord entry.
- Look for burnt wires or melted plastic.
- Replace the terminal block and any damaged wiring.
- Check thermal fuse / high-limit:
- Locate the oven thermal fuse or high-limit thermostat (often on the rear of the oven cavity).
- Test for continuity; if open, replace the oven thermal fuse / high-limit thermostat and investigate cause of overheating (cooling fan, vents).
- Control board:
- If power and safety devices are good, replace the electronic oven control board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Thermal Fuse / High-Limit Thermostat
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements