F32
Frigidaire
Temperature Probe / Sensor Out-of-Range
F32 error code, often related to temperature sensing or probe functions depending on model.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective meat probe (if equipped), Faulty probe jack, Damaged probe wiring harness, Control board misreading probe circuit
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker.
- Remove meat probe: If a probe is plugged into the oven, remove it and see if the error clears after a power reset.
- Inspect probe jack:
- Check the probe receptacle inside the oven for corrosion or food debris.
- Clean gently with a dry brush or cotton swab.
- Test probe (if available):
- Measure resistance of the probe at room temperature (commonly around 1000–1200 Ω, check tech sheet for your model).
- Replace the probe if open, shorted, or far off spec.
- Check wiring and control: If error persists with no probe inserted and jack is clean, inspect wiring from jack to control and replace the probe jack assembly or EOC as needed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Meat Probe / Probe Jack Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements