F0
Gaggenau
Keypad / Touch Control Stuck Key Error
Gaggenau range oven display shows F0, oven may not start or may shut off
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck or shorted touchpad key, Moisture or spill on control panel, Faulty oven user interface board, Damaged ribbon cable between keypad and control
How to Fix / Troubleshooting
Safety: For external cleaning, you may leave power connected. For internal access, disconnect power at the breaker.
- Clean the panel: Wipe the control panel with a slightly damp cloth, then dry thoroughly. Ensure no liquid seeps around the edges of the display or buttons.
- Check for stuck keys: Gently press each button to ensure it moves freely and is not physically stuck.
- Power reset: Turn off the range at the breaker for 5 minutes, then restore power and test.
- If F0 returns immediately: Disconnect power, remove the control panel per Gaggenau service instructions, and inspect the keypad ribbon cable for corrosion or damage.
- Replace components: Replace the touch control panel / keypad assembly if keys are shorted. If keypad is good, replace the electronic oven control (EOC).
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Touch Control Panel / Keypad
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements