F8
Gaggenau
Cooling Fan or Overheat Protection Fault
Oven shows F8, may be related to cooling fan or overtemperature protection
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed oven cooling fan, Blocked air vents around control panel, Faulty overtemperature thermostat, Wiring issue to fan or thermostat
How to Fix / Troubleshooting
Safety: Surfaces may be hot. Allow cooling and disconnect power before servicing.
- Listen for fan: During baking or shortly after, you should hear the cooling fan running. If not, suspect a fan issue.
- Check vents: Ensure the front and rear ventilation slots of the range are not blocked by cabinetry or objects.
- Access fan (technician): Remove the back panel to access the cooling fan motor and overtemperature thermostat.
- Test fan: Check for free blade movement and test the motor for continuity. Apply power carefully (bench test) if needed.
- Check thermostat: Test the overtemperature thermostat for continuity at room temperature.
- Replace faulty parts: Replace the cooling fan motor or overtemperature thermostat as required.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements