GE Profile Spark ignition module or power supply failure

All gas surface burners fail to ignite (no clicking on any knob)

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed spark module, No 120V power to range, Defective ignition switch harness on burner valves

How to Fix / Troubleshooting

Safety: Turn off gas and disconnect power before accessing internal components.

  • Check power: Verify the range has power (clock/display on). If not, check breaker and outlet.
  • Listen for clicks: If no burners click when any knob is turned to Lite, suspect the spark module or switch harness.
  • Inspect spark module: Access the spark module under the cooktop or behind the control panel. Look for burnt spots or melted casing.
  • Test switches: With power off, check continuity of the ignition switches on the burner valves when turned to Lite. Replace the switch harness if open.
  • Replace spark module: If switches are good and power is present, replace the spark module with an OEM GE Profile part.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Spark Ignition Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements