F9E0 or similar code, oven door lock error specifically during self-clean on newer GE Profile models

Safety: Disconnect power before servicing the lock system.

• Reset control: Turn off breaker for 5 minutes, then restore power and try a normal bake cycle to see if the code clears.
• Check lock operation: Start a self-clean cycle and listen for the lock motor. If it hums but does not fully move, the lock mechanism may be binding.
• Lubricate lightly: With power off, access the lock assembly and apply a small amount of high-temp lubricant to the latch pivot points (avoid switches and motor).
• Test lock switches: Use a multimeter to verify that the lock and unlock switches change from open to closed when the latch is moved by hand.
• Replace lock assembly: If the motor or switches fail tests, replace the complete door lock motor assembly.