LOC DOOR
GE Profile Door not locking for self-clean

LOC DOOR displayed when trying to start self-clean; oven will not enter clean cycle

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Door not fully closed, Misaligned door latch, Weak door lock motor, Faulty door lock switch

How to Fix / Troubleshooting

Safety: Ensure the door is closed firmly before starting self-clean.

  • Check door closure: Open and close the door firmly. Ensure nothing is obstructing the door gasket or latch.
  • Inspect latch alignment: Look at the latch on the door and the strike on the frame; adjust if visibly misaligned.
  • Test lock cycle: Start a self-clean and listen for the lock motor. If it hums but does not fully engage, the lock assembly may be weak or binding.
  • Service lock assembly: If LOC DOOR persists, access and test the door lock motor and switches; replace the assembly if defective.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Lock Motor Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements