GE Profile Door alignment or hinge failure

Oven door will not close fully or has large gap

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent or worn door hinges, Hinge springs broken, Deformed door gasket, Obstruction on door frame

Safety: Ensure the oven is cool before working on the door.

Inspect hinges: Open the door and check hinges for bending or looseness. Tighten hinge screws at the frame.
Check gasket: Inspect the door gasket for tears, hard spots, or sections pulled out of the channel. Reseat or replace as needed.
Remove obstructions: Clean any debris or baked-on residue from the door frame that may prevent full closure.
Replace hinges: If the door sags or will not stay closed, replace both door hinges as a set with OEM GE Profile hinges.

Medium 3/5

Oven Door Hinge

Check Price on Amazon

We may earn a commission from links on this page.