GE Self-Clean Interlock or Condition Not Met

Self-clean cycle will not start, display may show door or lock icon but no error code.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Door not fully closed, Faulty door lock switch, Oven temperature too high or too low to start, Control lock or Sabbath mode active

Safety: Ensure oven is empty and racks removed before self-clean.

Check door closure: Push firmly on the door to ensure it is fully closed. Listen for the latch engaging.
Disable locks/modes: Turn off control lock and Sabbath mode per user manual.
Cool oven: Allow oven to cool completely, then try again.
Door switch: If the control does not sense the door closed, test and replace the door lock switch or assembly.

Medium 3/5

Door Lock Switch / Assembly

Check Price on Amazon

We may earn a commission from links on this page.