Glem Gas
Electronic Timer Power or Internal Failure
Clock / timer not working or display blank but burners work
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on timer board, Loose connector to timer, Failed timer PCB, Neutral or live feed missing to timer
How to Fix / Troubleshooting
Safety first: Disconnect the appliance from mains power before removing the control panel.
- Check supply to timer: Using a multimeter (only if trained), verify that the timer receives the correct voltage at its input terminals.
- Inspect connectors: Reseat the timer's wiring harness and check for burnt pins.
- Internal fuse: Some timers have a small internal fuse. If accessible and blown, replace with the exact type and rating.
- Replace timer: If power is present but the display remains blank, replace the electronic timer/clock module with a Glem Gas-compatible part.
- Set time: After replacement, set the correct time; some ovens will not operate until the clock is set.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Timer / Clock Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements