Hansa Display / Timer Power Fault

Clock and display are dead but burners/oven still work (on some models)

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown low-voltage fuse on PCB, Failed display module, Loose connector to timer, Power surge damage

Safety first: Disconnect mains power.

Check internal fuse: Some Hansa control boards have a small fuse protecting the low-voltage circuit. Inspect and replace with the exact type if blown.
Inspect connectors: Reseat the plug between the main PCB and the display/timer module.
Replace module: If the fuse is intact and wiring is good, replace the Hansa display / timer module.

Medium 3/5

Display / Timer Module

Check Price on Amazon

We may earn a commission from links on this page.