F8
Hansa
Cooling Fan or Temperature Protection Fault
F8 error on oven display, cooling fan runs continuously or oven shuts down
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan motor, Stuck cooling fan thermostat, Faulty control board fan driver, Blocked ventilation
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing rear panels.
- Ventilation check: Ensure that the range has proper clearance and that rear/top vents are not blocked.
- Test cooling fan: Access the cooling fan at the rear/top of the oven cavity. Spin by hand and test for continuity. Replace the Hansa cooling fan motor if seized or open.
- Thermostat check: Some models use a thermostat to control the cooling fan. Test this thermostat for proper switching as the oven warms and cools.
- Control board: If the fan runs constantly even when cold, or never runs, the fan driver on the main control PCB may be faulty and require replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements