Hisense
Gas Oven Ignition Failure
Gas oven will not heat, broil may or may not work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed hot surface igniter, No gas supply to oven burner, Faulty oven safety valve, Defective oven thermostat or control board
How to Fix / Troubleshooting
Safety: Turn off gas and electrical power before servicing. If you smell strong gas, ventilate and contact your gas supplier.
- Observe igniter: With the oven set to bake, look through the burner view port. If the igniter does not glow within 30–60 seconds, it may be faulty.
- Test igniter resistance: Disconnect the igniter and measure resistance. A very high or open reading indicates a failed igniter that must be replaced with a Hisense-compatible part.
- Check gas shutoff: Ensure the oven gas shutoff valve (if present) is open and that stovetop burners receive gas.
- Safety valve: If the igniter glows but the burner never lights, the oven safety valve may be defective and should be replaced.
- Control system: On electronic models, if neither igniter nor valve receive power, the main control board or thermostat may be at fault and require replacement.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements