Induction or ceramic cooktop zone cycles on and off rapidly at high settings, not maintaining full power.

Safety: Ensure proper installation and ventilation as per Hisense specifications.

• Use correct cookware: Match pan size to zone and center it properly.
• Ventilation: Check that cabinet cutout and vents allow airflow. Remove items stored directly under the cooktop that block air.
• Cooling fan: Verify that the cooling fan runs when zones are used at high power. Replace the fan if not operating.
• Normal behavior: Some cycling is normal as the cooktop regulates temperature. If power is severely limited, the power module may be overheating or failing and should be inspected.