Hotpoint-Ariston Upper (Grill/Broil) Heating Element Failure

Electric oven does not heat on grill/broil function, but bake may still work.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open-circuit grill element, Loose or burnt terminals at the element, Faulty grill relay on control board, Broken wiring in grill circuit

Safety: Isolate the appliance from mains power.

Inspect element: Look at the upper grill element for visible damage or sagging.
Continuity test: Access the rear of the oven, disconnect one wire from the grill element, and measure resistance. Replace the element if open.
Terminal check: Tighten any loose spade connectors and replace any that are heat-damaged.
Control board: If the element and wiring are good, the grill relay on the Hotpoint-Ariston control board may have failed and the board should be replaced.

Medium 3/5

Grill / Broil Heating Element

Check Price on Amazon

We may earn a commission from links on this page.