Hotpoint-Ariston
Door Glass Assembly / Seal Failure
Oven door glass is loose, rattling, or has condensation between the panes.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose inner or outer glass retaining brackets, Failed door glass seals, Missing or damaged spacers, Door previously disassembled incorrectly
How to Fix / Troubleshooting
Safety: Ensure the oven is cool. Wear gloves to protect against sharp edges and glass.
- Tighten screws: Open the door and locate screws securing the inner glass frame. Tighten any that are loose.
- Inspect seals: Check the rubber or fiber seals around the glass panes for gaps or damage. Replace if deteriorated.
- Disassemble door: Remove the door (if design allows) and carefully separate the inner and outer panels to access the glass. Clean and dry all panes.
- Reassemble correctly: Refit the glass panes with the correct Hotpoint-Ariston spacers and seals in the original order. Ensure there are no gaps that could allow steam ingress.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Glass Assembly / Glass Seals
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements