F6
Hotpoint
Communication Error Between Keypad and Control Board
F6 displayed, oven may not respond to temperature changes or may shut off unexpectedly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose keypad ribbon cable, corroded connector, failing EOC, failing touchpad assembly
How to Fix / Troubleshooting
Safety first: Disconnect power at the breaker before accessing the control area.
Steps to check:
- Access control: Remove the back cover behind the control panel.
- Inspect ribbon cable: Locate the flat ribbon cable from the keypad to the EOC. Remove, inspect for cracks or corrosion, and clean contacts with contact cleaner.
- Reseat connectors: Firmly reconnect the ribbon and any other harness connectors to the EOC.
- Test operation: Restore power and test all keypad functions. If F6 returns, either the keypad or EOC is failing.
- Replace components: Start by replacing the keypad/control panel assembly if it is separate. If the issue persists, replace the EOC.
Note: Some Hotpoint models integrate keypad and EOC; in that case, replace the entire control assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Control Touchpad Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements