Display shows PF or "Power Failure" after an outage; clock may be flashing and oven functions disabled until cleared.

Safety first: If you suspect wiring issues, turn off power at the breaker before inspecting the rear terminal block.

Steps to clear:

• Reset clock: Press Clear/Off or Clock and set the time. PF should clear and normal operation resume.
• Check power supply: Ensure the range's breaker is fully ON and not partially tripped. Reset if necessary.
• Terminal block inspection: Pull the range out carefully, remove the rear cover over the power cord terminal block, and inspect for loose screws or burned wires. Tighten connections and replace any damaged parts.
• Monitor: If PF appears frequently without known outages, have an electrician check the household circuit for voltage drops or loose connections.

Note: PF itself is not a component failure code; it indicates an interruption in power.