Ikea Broil Element Circuit Failure

Electric oven does not heat in broil mode, bake may still work

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open broil heating element, Loose or burnt broil wiring, Failed broil relay on control board

Safety first: Disconnect power at the breaker.

Inspect broil element: Check the upper element for visible breaks or burn spots. Replace if damaged.
Test continuity: Access the element terminals from the rear, disconnect wires, and measure resistance. An open reading means the element is bad.
Check connections: Tighten or replace any loose or burnt terminals.
Control board: If the element and wiring are intact, the broil relay on the control board may be defective and require board replacement.

Medium 3/5

Broil Heating Element

Check Price on Amazon

We may earn a commission from links on this page.