F0E0
Ikea
Cooktop User Interface to Power Board Communication Error
Induction cooktop or range displays F0E0 and will not heat
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose harness between touch control and power module, Failed user interface board, Defective induction power module
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker. Induction units contain high-voltage capacitors that can retain charge; wait several minutes after disconnecting power.
- Access electronics: Remove the cooktop glass (usually held by screws from below or clips) to expose the user interface (UI) board and power module.
- Check connectors: Locate the low-voltage harness between the UI and power board. Unplug and replug the connectors, ensuring they are fully seated and free of corrosion.
- Inspect for damage: Look for burnt components, cracked boards, or signs of overheating on either board.
- Board replacement: If wiring is intact and F0E0 persists, replace the user interface board first (most common). If still unresolved, the power module may also need replacement.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Induction Power Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements