F0E6
Ikea
User Interface Touch Panel Error
Induction cooktop displays F0E6 and may not respond to touch controls
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed touch sensor board, Moisture on glass panel, Loose UI harness connection
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before removing the cooktop from the counter.
- Dry surface: Wipe the glass surface thoroughly and ensure it is completely dry. Moisture or spills can trigger touch errors.
- Power reset: Leave the unit powered off for 5–10 minutes, then restore power and test.
- Inspect UI board: Remove the glass top and inspect the touch control board for cracks, burn marks, or corrosion. Reseat the ribbon cable between the UI and power module.
- Replace UI board: If the error persists and the board shows signs of damage or unresponsive keys, replace the user interface board assembly.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Cooktop User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements