Induction cooktop shows F0E7 when multiple zones are used at high power, then shuts down

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Internal power distribution fault, Overloaded power module, Firmware power management issue

Safety first: Surfaces may be hot; allow to cool before touching.

Reduce load: Avoid running all zones at maximum power simultaneously. Use lower power settings or stagger cooking times.
Check ventilation: Ensure adequate airflow under the cooktop; overheating can trigger load errors.
Power reset: Turn off the breaker for 5 minutes, then restore power and test with fewer zones.
Service required: If F0E7 appears even with light use, the power module may be defective and should be replaced by a qualified technician.

Hard 4/5

Induction Power Module

Check Price on Amazon

We may earn a commission from links on this page.