Ikea
Door Hinge or Gasket Failure
Oven door will not close fully or does not seal, heat escapes around door
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, Damaged door gasket, Misaligned door latch
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before working on the door.
- Inspect gasket: Check the rubber door gasket around the cavity for tears, gaps, or hardened sections. Replace if damaged.
- Check hinges: Open the door fully and inspect hinges for bending or looseness. Tighten mounting screws at the frame.
- Hinge replacement: If the door sags or does not close flush, replace both hinges as a set using OEM Ikea/Whirlpool hinges for your model.
- Latch alignment: Ensure the latch engages smoothly. Adjust the latch striker if possible per service instructions.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements