E9
Ilve
Internal Configuration / EEPROM Error
Ilve induction cooktop shows E9 and will not power any zones
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted firmware or configuration data on main control board, Power surge damage to memory IC, Incorrect replacement control board not programmed for model
How to Fix / Troubleshooting
Safety: Turn off power at the breaker before any disassembly.
- Power reset: Leave the cooktop unpowered for at least 10 minutes to allow full discharge. Restore power and check if E9 clears.
- Check model label: Confirm the model and version of your Ilve cooktop. If a control board was recently replaced, verify the part number matches the exact model.
- Inspect board: Access the main control board and look for obvious damage (burn marks, cracked components). There is no user-serviceable way to reprogram EEPROM without Ilve tools.
- Professional service: E9 typically requires replacement or reprogramming of the main control board by an authorized Ilve service center. Do not attempt to modify firmware yourself.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Induction Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements