Ilve Oven Door Hinge or Hinge Receiver Failure

Oven door will not close fully or sits crooked

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Bent or worn door hinges, Damaged hinge receivers in the oven frame, Loose door screws, Warped door from overheating

Safety: Support the door when removing to avoid dropping it.

Inspect hinges: Open the door to the broil stop position and check for play or sagging at the hinges.
Remove door: Engage hinge locks (if present) and lift the door off the hinge arms. Inspect hinges and receivers for wear or bending.
Tighten screws: Check and tighten screws securing the inner and outer door panels.
Replace hinges: If hinges are bent or do not hold the door firmly, replace both hinges as a set with Ilve-specific parts. Replace hinge receivers if worn.

Medium 3/5

Oven Door Hinges and Hinge Receivers

Check Price on Amazon

We may earn a commission from links on this page.