JennAir range shows F2E1; touch panel not responding correctly

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Contaminated touch surface, Stuck or shorted key on membrane, Damaged glass touch panel, Faulty keypad ribbon

Safety: Disconnect power before removing the panel.

Clean keypad: Wipe the touch surface with a soft cloth and mild cleaner, then dry thoroughly.
Power reset: Turn power off for 5 minutes, then restore. If F2E1 reappears immediately, a key is likely stuck.
Inspect for damage: Look for cracks or bulges in the touch panel. Replace if damaged.
Replace keypad: Remove the control panel, disconnect the keypad ribbon, and install a new JennAir-compatible touchpad or glass UI assembly.

Medium 3/5

Oven Touchpad / Glass UI

Check Price on Amazon

We may earn a commission from links on this page.