F5E0
JennAir
Door Lock Motor or Switch Error
JennAir range displays F5E0; door lock error during self-clean
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed lock motor, Faulty lock position switch, Loose lock harness, Jammed latch
How to Fix / Troubleshooting
Safety: Turn off power and let the oven cool.
- Cancel cycle: Press Cancel to stop self-clean. Wait for the oven to cool and see if the door unlocks.
- Manual unlock: Use the manual release (if available) through the top or rear panel.
- Inspect lock assembly: Remove the top or rear panel, check the lock motor and switches for damage or loose connections.
- Test switches: Use a meter to verify that lock/unlock switches change state when the latch moves. Replace the lock assembly if they do not.
- Replace lock motor assembly: Install a new JennAir-compatible door lock motor/switch assembly if defective.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Door Lock Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements