JennAir range shows F9E0; oven will not start, door lock error

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open door lock motor, Broken lock wiring, Failed lock relay on control, Jammed latch

Safety: Disconnect power.

Inspect lock wiring: Access the lock assembly from the top or rear and check for loose or broken wires.
Test motor: Use a meter to check continuity of the lock motor. Replace if open.
Check for binding: Move the latch manually to ensure it is not jammed. Clean and lubricate lightly if needed.
Replace lock assembly: Install a new JennAir-compatible lock motor assembly if defective.
Control board: If the lock is good but never receives power, the control board lock relay may have failed and require replacement.

Hard 4/5

Oven Door Lock Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.