JennAir Door Hinge or Latch Misalignment

JennAir oven door will not close fully or pops open slightly (no error code)

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or bent door hinges, Weak hinge springs, Deformed door gasket, Obstruction at door frame

Safety: Ensure the oven is cool before working on the door.

Inspect hinges: Open the door fully and check hinges for bending or looseness. Tighten hinge screws at the frame if loose.
Check gasket: Inspect the door gasket for bulges or hardened sections that prevent full closure. Replace if damaged.
Remove obstructions: Make sure no racks or pans are preventing the door from closing.
Replace hinges: If the door sags or will not stay closed, replace both JennAir-compatible door hinges as a set for even tension.

Medium 3/5

Oven Door Hinge Set

Check Price on Amazon

We may earn a commission from links on this page.