E07

Leisure Pan Detection / Induction Sensor Error

Leisure induction hob beeps and shows E07 when a zone is turned on, no heating occurs.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Incompatible cookware, faulty pan detection sensor on coil, misaligned induction coil, defective touch control PCB

How to Fix / Troubleshooting

User-level checks:

Verify that the pan is magnetic (a fridge magnet should stick firmly to the base).
Use a flat-bottomed pan that matches the size of the zone.
Clean the hob glass and ensure there is no liquid or foil between the pan and glass.
Try another zone with the same pan to see if the issue is zone-specific.

If E07 persists on one zone only:

Isolate power and remove the hob glass.
Check that the induction coil is firmly fixed and centered under the marked zone. Re-secure any loose mounting brackets.
Inspect the small pan detection sensor wiring (if separate) from the coil to the power board for damage.
If wiring and coil position are correct, the induction power module or touch control PCB may be faulty and require replacement.

Warning: Internal hob repairs involve live mains and high-frequency circuits; if unsure, contact a professional.

Repair Difficulty

Hard 4/5

Required Part

Induction Coil Assembly

Check Price on Amazon

We may earn a commission from links on this page.