E19
Leisure
Cooling Fan Motor / Control Fault
Leisure range shows E19 and the cooling fan does not run, oven shuts down prematurely.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan motor, seized fan bearings, blocked fan blades, faulty fan relay on main PCB
How to Fix / Troubleshooting
Safety first: Isolate the cooker from mains power and allow it to cool.
Check the cooling fan:
- Remove the top panel or rear panel (depending on model) to access the cooling fan motor above or behind the oven cavity.
- Try rotating the fan blades by hand; they should spin freely without grinding noises.
- If the fan is stiff or seized, replace the cooling fan motor.
- Check the fan wiring and connectors for heat damage or looseness.
- Restore power briefly and start the oven while observing (from a safe distance) whether the fan receives voltage when it should run. If not, the fan relay on the main PCB may be faulty and the PCB will need replacement.
Note: Do not operate the oven for extended periods without a functioning cooling fan; this can damage electronics and surrounding cabinetry.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements